Editing Daisy chain (electrical engineering) (section)

=== Computer hardware ===
Some hardware can be attached to a computing system in a daisy chain configuration by connecting each component to another similar component, rather than directly to the computing system that uses the component. Only the last component in the chain directly connects to the computing system. For example, chaining multiple components that each have a [[Universal asynchronous receiver/transmitter|UART]] port to each other. The components must also behave cooperatively. e.g., only one seizes the communications bus at a time.

* [[SCSI]] is an example of a digital system that is electrically a [[Computer bus|bus]], in the case of external devices, is physically wired as a daisy chain. Since the network is electrically a bus, it must be terminated and this may be done either by plugging a terminator into the last device or selecting an option to make the device terminate internally.
* [[MIDI]] devices are usually designed to be wired in a daisy chain. It is normal for a device to have both a THRU port and an OUT port and often both can be used for chaining. The THRU port transmits the information through with minimal delay and no alteration, while the OUT port sends a completely regenerated signal and may add, remove, or change messages, at the cost of some delay in doing so. The difference can result in the signals arriving at different times; if the chain is long enough, it will be distorted so much that the system can become unreliable or non-functional.
* Some [[Serial Peripheral Interface Bus]] (SPI) IC products are designed with daisy chain capability.
* All [[JTAG]] integrated circuits should support daisy chaining according to JTAG daisy chaining guidelines.<ref>{{Cite web|url=http://www.jtagtest.com/downloads/viatap.pdf|title=ViaTAP user's manual, chapter Design guidelines for use with ViaTAP|url-status=dead|archive-url=https://web.archive.org/web/20170222084446/http://jtagtest.com/downloads/viatap.pdf|archive-date=2017-02-22|access-date=2009-01-08}}</ref>
* [[Thunderbolt (interface)]] also supports daisy-chained devices such as [[RAID]] arrays and [[computer monitors]].<ref>{{Cite web|url=https://www.intel.com/content/www/us/en/products/docs/io/thunderbolt/thunderbolt-technology-developer.html|title=Thunderbolt™ for Developers|website=[[Intel]]|language=en|access-date=2020-04-02}}</ref>
* [[DisplayPort]] 1.2 and higher features Multi-Stream Transport (MST) mode. In this mode, multiple screens can be connected either using a hub or as a daisy chain.
* The [[Hexbus]] is the 10-wire bus of [[Texas Instruments]], used in the [[TI-99/4A]], [[CC-40]] and [[TI-74]].